Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Programmed play
Plays back up to 30 selected tracks in programmed order.
1 Instop mode, press SHUFFLE/PROGRAM on the
remote repeatedly so that "PRGM'" indicator is
displayed.
2 Press the numbered buttons on the remote to
program a track.
-To select the 15th track, press >10, 1 and 5.
-To select the 20th track, press >10, 2 and 10/0.
The selected track number lights up on the display.
3 Repeat step 2 to program other tracks.
The total number of selected tracks and total playing time
will be displayed.
4 Press PHL CD to start play.
The track number for the current track flashes on the
display.
¢ During programmed play, you cannot select a track with the
numbered buttons.
e If the total playing time of the program exceeds 99 minutes
and 59 seconds, or if a track with a track number exceeding
30 is programmed, the playing time is displayed as
e You cannot program more than 30 tracks. "FULL" is
displayed.
To clear a track
Press CLEAR on the remote in stop mode. Each time you press
the button, a track is cleared from the end of the program.
To clear the entire program
Press Il in stop mode.
To add tracks to the program
Repeat step 2 before starting playback. The tracks are added
to the end of the program.
To cancel programmed play
Press SHUFFLE/PROGRAM repeatedly until "PRGM"
disappears.
eThe program contents are retained even if the program
cancelled or after programmed playback finishes. The same
program plays back if you carry out steps 1 and 4.
Notes on CDs
e Do not place more than one disc.
e Do not tilt the unit with a disc loaded.
Werbung
