Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TAPE RECORDING
To record a CD
Use only type | (normal) tapes.
1 Press APUSH EJECT to open the cassette holder.
2 Insert the recordable tape.
Insert with the exposed side down, and the side to be
recorded on first facing out from the unit. Press 4s PUSH
EJECT to close the cassette holder.
3 Press FUNCTION on the remote repeatedly to
select the CD function, and load the disc.
To record only one track, start play of the track.
4 Press SYNCHRO REC.
The unit enters the recording pause mode, and "REC"
indicator flashes in the display.
5 Press REC START /PAUSE to start recording.
"MUTING" flashes in the display for 10 seconds and
recording starts.
When only a track is to be recorded, CD playing returns
to the beginning of the current track and recording starts.
¢ Volume or tone adjustment(s) does not affect recording.
e"NO TAB" is displayed if you attempt to record a tape
with the tab broken off.
¢ Only one side of the tape can be recorded at a time.
To record a selected set of tracks from a CD
Program the desired tracks (see "Programmed play" on page
9) and then press SYNCHRO REC.
To record radio programs and external
equipment
Use only type | (normal) tapes.
71 Press &PUSH EJECT to open the cassette holder.
2 Insert the recordable tape.
3 Prepare the source.
To record radio programs, press TUNER/BAND and tune
in the desired station.
To record from connected external equipment, press AUX
and prepare the equipment.
4 Press REC START/PAUSE twice to start recording.
When recording input from connected equipment,
manually start playback of the source.
To stop recording
Press Ml.
To pause recording (only for TUNER or AUX source)
Press REC START/PAUSE. Press again to resume.
To record a 4-second blank space (only for Manual
Reocrding)
Inserting 4-second blank spaces may help you locate the
beginning of the track on other equipment with the "Music
Sensor" function.
.
1 Press B> TAPE (REC MUTING) on the unit during recording
or in recording pause mode.
"MUTING" flashes in the display for 4 seconds (a blank
space is added) and then the unit enters recording pause
mode.
2 Press REC START/PAUSE to resume recording.
To record a blank space shorter than 4 seconds, press B>
TAPE (REC MUTING) again while "MUTING' flashes.
To record a blank space longer than 4 seconds, press b>
TAPE (REC MUTING) again after the unit enters recording
pause mode.
Each time the button is pressed, a 4-second blank space is
added.
To erase a tape
1 Insert the tape. Set the tape to the desired point if needed.
2 Press AUX.
lf optional equipment is connected to the AUX IN jacks, turn
it off.
3 Press REC START/PAUSE twice.
To prevent accidental erasure
Remove the plastic tab of the cassette tape with a screwdriver
or other pointed tool. To record on the tape again, cover the
detection slot with adhesive tape.
17
Werbung
