Abus RWM250 Bedienungsanleitung Seite 14

Alarm and indication sounds
Indication sounds:
When the device is activated, a single sound is emitted (short beep)
Volume:
Indication sounds:
When the test/stop button is pressed, a single sound (long beep) is emitted
Volume:
Alarm sounds:
A double sound is emitted (short beep, longer beep) every second.
0,5 second
Volume:
Alarm sounds:
A single sound is issued every second (short beep).
1 second
Volume:
Cause: Activation tone
Cause: Test tone
Cause: Smoke alarm
Cause: Temperature alarm
– 26 –
Silencing the alarm sounds
Every alarm sound can be temporarily deactivated by pressing
the test/ stop button (Fig. 1, IV.)
(smoke alarm and temperature alarm: 10 min.).
Indication sounds:
A single sound is emitted every 90 seconds (short beep).
90 seconds
Volume: Cause: Battery error message
If the smoke alarm emits one of the two indication sounds
described above, the device will remain capable of providing its
warning function for a maximum of 60 days and must therefore
be replaced before this emaining 60-day period expires !
Indication sounds:
A double sound is emitted every 90 seconds (short beep)
90 seconds
Volume: Cause: Contamination of the device
Silencing the indication sounds:
All indication sounds can be temporarily deactivated by
pressing the Test/ Stop button (Fig. 1, IV.)
(battery error message and contamination warning: 24 hours).
Alarm and indication sounds
10 min
– 27 –
GB
24 h