Werbung
BLF/List State
Unknown
Not Monitored
For both BLF and BLF/List, the parameter "XXXkeyN ring splash" is applicable when the "..."keyN ring
splash" value is set to control the ring splash alert pattern.
Configuring a BLF/List Key Using the Mitel Web UI
If you set a key to use BLF/List, you must also enter a BLF List URI at Operation > Softkeys and XML >
Services. The BLF List URIis the name of the BLF list defined on the BroadSoft BroadWorks Busy Lamp
field page for your particular user. For example, sip:9@192.168.104.13. The value of the BLF List URI
parameter must match the list name configured. Otherwise, no values display on the 6915 screen and the
feature is disabled.
1.
Click on Operation > Softkeys and XML.
2.
Select from Key 1 through Key 20 on the Top keys.
3.
In the Type field, select BLF/List (BroadSoft BroadWorks).
4.
In the Line field, select a line number that is actively registered to the appropriate SIP proxy you are
using. Valid values are:
•
global
•
1 through 24
Anmerkung:
The Label and Value field are not required. The BroadWorks BLF/List name is configured in the
BLF List URIfield instead.
Version 1.0
Benutzerleitfaden
LED Behavior
Off
Off
Softkeys konfigurieren
Softkey Icon
92
Werbung
