AEG BD431C Benutzerinformation Seite 60

Step 1 Turn off the oven and wait until it is
cold.
Step 2 Pull the front of the shelf support
away from the side wall.
Step 3 Pull the rear end of the shelf support
away from the side wall and remove
it.
Step 4 Install the shelf supports in the oppo‐
site sequence.
11.4 How to use: Catalytic fan cover
The fan cover is coated with a catalytic
enamel. It absorbs fat which collects on the
walls while the oven works. To support the
Turn off the oven and wait until it is
cold.
Clean the oven with catalytic cleaning
Step 1 Turn off the oven and wait until it is cold.
Step 2 Remove all accessories and removable shelf supports.
Step 3 Clean the oven cavity with warm water and washing-up liquid, then dry it.
Step 4
Set the function:
Step 5 Set the temperature: 250 °C.
Duration: 1 h
Step 6 When the oven is cold, clean the cavity with a wet soft cloth.
11.5 How to remove and install:
Door
You can remove the door and the internal
glass panels to clean it. The number of glass
panels is different for different models.
60 ENGLISH
Before the catalytic cleaning
Remove all accessories and remova‐
ble shelf supports.
.
1
self-cleaning procedure, heat the empty oven
on a regular basis.
Spots or discolouration of the catalytic
coating have no effect on the cleaning.
Clean the oven floor and the inner
door glass with warm water, soft
cloth and mild detergent.
WARNING!
The door is heavy.
CAUTION!
Carefully handle the glass, especially
around the edges of the front panel. The
glass can break.
2