ims PRO SPOT 14500 TRAFO PRO Bedienungsanleitung Seite 44

MECHANICAL OVER-OPENING OF THE ARM
To open the arm and gain easier access to the bodywork, activate the over-opening by pressing the clamp button (FIG 2 -10).
1
Press the button (FIG 2 -10)
2
The latch sticks out on the open lock side
3
The lever must be open (~90°) at the stop on the latch.
4
The arrows must not be aligned
Incline the arm.
4
THE GYROSCOPE
Remove the plastic handle, tilt the gyro as shown and slide it to the
shell.
It can rotate around the clamp 360°.
44
IMS SPOT 14500 TRAFO PRO
2
4
3
1
3
1
2
2
1
1
2
Fix the gyro with 4 M5x10 headless screws.
The stop on the gyro can be raised or lowered. It is used to shift the
balancer cable so that a large arm can be engaged more easily.
EN
4
3
3
4