Commissioning; Installation Check; Switch On The Device; Quick Setup - Endress+Hauser iTEMP HART TMT 142 Bedienungsanleitung

TMT142
Endress+Hauser
6

Commissioning

6.1

Installation check

Before commissioning the measurement point make sure that all final checks have been carried out:
• Checklist "Installation check"
• Checklist "Connection check"
6.2

Switch on the device

Once the power has been connected, the field transmitter is operational.
6.3

Quick Setup

Using the Quick Setup the operator is led through all the most important unit functions, which must
be set up for standard measurement operation of the unit.
Standard set-up
®
Availability in ReadWin 2000, HART
7
(symbol )
Function
PV mode
PV unit
Sensor
Sensor type
Sensor connection
Unit
OUTPUT
PV lower range value
PV upper range value
Safety/maintenance functions
Fault condition
Alarm ambient temperature
Further set-up for special measurement applications are possible (see Section 6.4.1).
6.4

Device configuration

6.4.1 Description of device functions
All parameters that can be read out and set-up for the configuration of the temperature transmitter
are listed and described in the following tables. The menu structure in the ReadWin
®
handheld terminal DXR 375

Commissioning

7
®
ReadWin 2000 /FieldCare
+ +
+ +
+ +
+ +
+ +
+ +
+ +
+ +
+ +
+ +
®
2000 PC
63