Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
6
Assembling the Lawn
Mower
6.1
Assembling, Attaching and
Detaching the Grass Catcher
Box
6.1.1
Assembling the Grass Catcher Box
► Fit upper part of grass catcher box (1) onto
lower part of grass catcher box (2).
► Press pins (3) through openings (4) from the
inside.
► Press upper part of grass catcher box (1)
downwards.
The upper part of the grass catcher box
engages with a click.
6.1.2
Engaging the grass catcher box
► Shut off the engine.
► Place the lawn mower on a level surface.
► Open discharge flap (1) and keep it open.
► Take hold of grass catcher box (2) by han‐
dle (3) and engage the hook (4) from above
into the mounting notches (5).
► Lower the discharge flap (1) onto the grass
catcher box (2).
6.1.3
Detaching the Grass Catcher Box
► Stop the engine.
► Place the lawn mower on a level surface.
► Open the discharge flap and hold it open.
► Remove the grass catcher box upwards by the
handle.
► Close the discharge flap.
30
6 Assembling the Lawn Mower
6.2
Attaching and Detaching the
Extension
6.2.1
Engaging the extension
► Shut off the engine.
► Pull off the spark plug boot.
► Place the lawn mower on a level surface.
► Depress the safety latch (1) and keep it
pressed.
► Open side discharge flap (2) and hold it open.
► Engage the hooks (3) on the shaft (4) from
below.
► Rest the side discharge flap (2) on the exten‐
sion (5).
► Attach the spark plug boot.
6.2.2
Disengaging the extension
► Shut off the engine.
► Pull off the spark plug boot.
► Place the lawn mower on a level surface.
► Open side discharge flap (1) and hold it open.
► Disengage the hooks (2).
► Fold the extension (3) up and lift it away.
► Close side discharge flap (1).
► Attach the spark plug boot.
6.3
Adding Engine Oil
The engine oil lubricates and cools the engine.
The engine oil specification and capacity can be
found in the engine instruction manual.
0478-131-9873-B
Werbung
