Herunterladen Diese Seite drucken

Pioneer PD-S602 Bedienungsanleitung Seite 14

Werbung

CONFIRM SUPPLIED ACCESSORIES
VERIFIER LES ACCESSOIRES FOURNIS
@
Output cable x 1
@
Remote control unit x 1
@ AAAVROS dry cell batteries x 2
PUT BATTERIES INTO THE REMOTE
CONTROL UNIT
@® Cable de sortie x 1
@ Télécommande x 1
®
Piles a cellules seches AAA/RO3 x 2
METTRE DES PILES DANS LA
TELECOMMANDE
PD-S502
Open the lid of the battery compartment on the rear of the remote
control unit, and insert the batteries, taking care to align the (+)
and (—) polarities correctly.
NOTES:
@
Inorder to prevent battery leakage, remove the batteries when
not using the remote control unit for an extended period (one
month or more).
If leakage occurs, carefully wipe away any
battery fluid inside the compartment, and replace the batteries
with new ones.
@ Do not allow books or other objects to rest on top of the re-
mote control unit, since the buttons may be depressed, causing
faster exhaustion of the batteries.
Incorrect use of batteries may cause leakage or rupture.
Always be sure to follow these guidelines:
A. Always insert batteries into the battery compartment
correctly matching the positive
and negative
polarities,
as shown
by the display
inside
the
compartment.
B. Never mix new and used batteries.
C. Batteries of the same size may have different voltages,
depending on brand.
Do not mix different brands of
batteries.
14
<PRE1173>
En/Fr
Ouvrir le couvercle du compartiment des piles a I'arriére de la
télécommande et insérer les piles en respectant la polarité (+) et
(-).
REMARQUES:
e
Pour éviter une fuite des piles, les retirer si vous n'avez pas
intention d'utiliser la télécommande pendant longtemps (un
mois ou plus). Dans le cas d'une fuite, essuyer soigneusement
le fluide des piles dans le compartiment et remplacer les piles
par des neuves.
e@ Ne pas poser des livres ou autres objets sur la télécommande
car des touches peuvent étre pressées, ce qui provoque une
usure accélérée des piles.
Une utilisation incorrecte des piles peut provoquer une fuite
ou une rupture.
Toujours suivre ces instructions:
A. Toujours
insérer correctement
les piles dans
le
compartiment en respectant les polarité positive @ et
négative ©. comme indiqué dans le compartiment.
B. Ne jamais mélanger des piles neuves et usagées.
C. Des piles de méme
taille peuvent
étre de tension
différente selon leur marque.
Ne pas mélanger des piles
de marques différentes.

Werbung

loading

Diese Anleitung auch für:

Pd-s502