Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
4. Get to Know Your Bike
4.06 Battery and charger
The Electric Two is getting its power from our in-house developed rechargeable Li-ion Battery. This chapter features instructions and
operational guidelines.
Installing the battery
Step 1 : Place in holder
Press once to increase RPM level.
Insert the lower part of the battery precisely into the battery holder
(lower battery bracket).
1
Your battery needs to be clicked in completely before riding the bike and should be aligned with the frame.
For correct insertion, the battery must be connected, ensuring all pins are correctly connected to the battery holder. When push-
ing the battery into position. Make sure that the battery has clicked into the locking mechanism before you set off.
Removing the battery
Step 1 : Unlock battery lock
Make sure the handlebar is straight. Next,
take your battery key and insert the key into
the battery lock. Turn the key in a clockwise
direction about 90 degrees.
Be careful pulling out the battery, to not scratch the frame.
28
Step 2 : Click battery in
Push the upper end of the battery into the holder. As soon as
the battery is correctly placed, there will be an audible click.
Additional locking is not needed.
2
Click
Step 2 : Turn battery lever
Pull the release lever attached to the
battery. The battery will come loose from
the holder. Hold the battery tightly as it
is heavy.
Step 3 : Remove the battery
Remove the battery from the battery
holder.
Werbung
