Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Attention. The switch must point
2. Adjust the 4 snap-in screws
with a screwdriver to ensure
that the fume hood is securely
fastened in the cabinet. Observe
the direction of rotation of the
Reattach the glass panel.
22
in the direction of the person
installing the device.
screws!
Step 4
Step 3
1. Slide the hood into the mounting
hole of the kitchen cabinet until the
snap-in screws lock into place.
Important notes on installation:
• The switch must point in the direction
of the person installing it.
• The mounting hole in the kitchen
cabinet must be centered.
• Pay attention to the direction of
rotation of the screw when adjusting
the snap-in screws.
The installation is now complete.
Snap-in screw
Step 5
Werbung
