WimTec PROOF W6 Montageanleitung Und Bedienungsanleitung Seite 19

PROOF W6
Specifi cations
Operating voltage:
Power consumption:
Magnetic valve:
Active range:
Close-Active range:
Flushing:
Flushing stop:
Stagnation rinse:
Continuous fl ow:
Cleaning stopp:
Flow rate:
Static pressure:
Water temperature:
Flow rate:
Water inlet:
Front plate:
Thermost handle:
Outlet:
Assembly
Dimensions in mm
!
Power supply:
2 x 0,5 mm max. 100 m total cable length
2
Power supply one-fold Art.No. 117 899
Power supply fi ve-fold Art.No. 113 792
Power supply 230 V / 12 V not mountable in basic
kit or in any protective areas.
Control line for variant with TD:
2 x 0,5 mm max. 100 m total cable length
2
via power supply 230 V 50 Hz / 12 V=
Art.No. 117 899 - power supply for one control unit
Art.No. 113 792 - power supply for up to 5 control units
max. 3.5 W
6 V cartrigde
from 15 cm - 30 cm (30 cm factory setting)
4 - 5 cm
as long as user is in active range
from 10 s - 10 min (in manual program from 10 s - 60 s)
activatable, after 3 h - 48 h of none-use for 10 s
activatable, for 10 s - 10 min
activatable, for 3 min
0,05 - 0,6 MPa (0,5 - 6 bar)
max. 0,8 MPa (8 bar)
max. 70 °C (max. 80 °C for max. 10 min)
6 l/min (independent of pressure)
R 1/2" IT
Stainless-steel / Chromed brass
Chromed brass
Chromed brass
12 V=
min 12 cm
DN 15
WimTec OCEAN W6
Wall tap control
EN
Active range
15 - 30 cm
5°
20°
19