Conel CLEAR PRO FILL Bedienungsanleitung Seite 33

/ Assign a project name, enter your user data and confi rm your
entries. Then select a user name and assign a password with at
least eight characters.
/ Read the privacy policy and agree to it. Then tap on „Register".
Note that remote access to the CLEAR PRO FILL fi lling
stati on All-in-one via the Internet is only possible if there is
an acti ve Internet connecti on.
Do not switch off your router if you want to control the
CLEAR PRO FILL fi lling stati on All-in-one via the Internet and
/ or with the CLEAR PRO app.
WIFI
/ Acti vate the AccessPoint of the CLEAR PRO FILL fi lling stati on
All-in-one so that the app can connect to the device. To do
this, press the
/
If the connecti on is established, the app wants to join the WiFi of
the CLEAR PRO FILL fi lling stati on All-in-one. Tap on „Connect".
Assign the desired WiFi network to the CLEAR PRO FILL
fi lling stati on All-in-one by selecti ng it from the list.
/
Enter the password of the selected WiFi network, tap OK and
„Save".
/
The corresponding confi rmati on appears.
/
Go back to the listi ng of the devices in your project. When
connected, a green dot appears: The CLEAR PRO FILL fi lling
stati on All-in-one is connected to your WiFi network.
Make sure you are near the device to establish a connecti on.
If no connecti on is established, check the AccessPoint mode.
The AccessPoint switches off aft er three minutes and must
be reacti vated if necessary.
- icon on the Multi Control.
33