Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Final tasks
NOTE!
When installing the wirefeeder housing cover, make sure that the cables and
hoses are not kinked, pinched, abraded or otherwise damaged.
1
2
3
4
5
42
(2)
(3)
Push the wirefeeder housing cover (3) onto the device as far as it will go
Tighten 4 TX 20 screws (1)
Close the wirefeeder cover (2)
Move the device to its home position
Connect to other system components
(1)
(1)
(1)
(1)
Werbung
