Avigilon 5.0MP-HD-DOME-DN Installationsanleitung Seite 19

5. Varifocal Lens Only – Rotate the zoom ring on the lens
until the desired zoom position is achieved.
6. Rotate the focus ring on the lens until the desired focus is
achieved.
Focus on an object slightly closer than the intended area
to compensate for the focus shift caused by the dome
bubble's refraction.
7. IR Dome Only – Clip the IR illuminator ring onto the base.
IR illuminator ring with
anti-reflective gasket
Figure: IR illuminator installation
Connecting to the Network Video Recorder
Important: To avoid networking problems, only use network switches
recommended by Avigilon.
Connect the dome camera to the same network as the server running
the Avigilon Control Center software. An IP address is automatically
assigned to the device, and will be detected by the software. For more
information on how to configure the connection, see the software user
guide.
The connection status LEDs show the progress in connecting to the
server and are described in the following table. By default, the
12