Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mounting the Dome Camera
The dome camera can be mounted to a surface on its own or using
one of the four dome camera mounting accessories: indoor electrical
box mounting plate, indoor in-ceiling mount, indoor/outdoor mounting
base, and indoor/outdoor pendant mount.
To mount the dome camera, complete the following steps:
1.
Using the drill template, drill three mounting holes and one
cable entry hole in the ceiling/ wall. If using a dome
camera mounting accessory, this step is not necessary.
2.
Drive three screws into mounting holes and leave 6 mm
¼
(
") between the screw head and the ceiling/wall surface.
3.
Pull the cables through the cable entry hole in the ceiling/
wall and the cable entry hole in the dome camera.
4.
Place the dome base on the screws using the keyed
mounting slots and rotate it clockwise.
5.
Tighten the screws to hold the dome camera in place.
Warning — Only use UL listed mounting brackets suitable
for the mounting surface and can sustain a minimum 0.53 kg
(1.2 lbs), plus the weight of the attached lens.
Caution — This camera is designed for indoor use only.
For outdoor use, an outdoor mounting accessory is required.
.
Figure: Dome camera installation.
9
Werbung
