Makita E UC3020A Bedienungsanleitung Seite 17

Turn the bar over when changing the chain so that the
bar groove wears evenly.
CAUTION:
Only use chains and bars which are approved for
•
this model of saw (refer to " SPECIFICATIONS ").
Fig.34
Before fitting a new saw chain, check the condition of the
sprocket.
CAUTION:
A worn sprocket will damage a new saw chain.
•
Have the sprocket replaced in this case.
Always fit a new locking ring when replacing the
sprocket.
Maintaining the chain and run-down brakes
The braking systems are very important safety features.
Like any other component of the chain saw, they are
subject to a certain degree of wear. They must be
inspected regularly by a MAKITA specialist repair shop.
This measure is for your own safety.
Storing tool
Biologically degradable saw chain oil can only be kept
for a limited period. Beyond two years after manufacture,
biological oils begin to acquire an adhesive quality, and
cause damage to the oil pump and components in the
lubricating system.
Before taking the chain saw out of service for a
longer period, empty the oil tank and fill it with a
small quantity of engine oil (SAE 30).
Run the chain saw briefly to flush all residue of the
biological oil out of the tank, lubricating system and
saw mechanism.
When the chain saw is taken out of service, small
quantities of chain oil will leak from it for some time
afterwards. This is normal, and is not a sign of a
fault.
Store the chain saw on a suitable surface.
Before returning the chain saw to service, fill up with
fresh BIOTOP saw chain oil.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.
ACCESSORIES
CAUTION:
These accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
or attachments
Only use accessory or
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Makita Service Center can be found on the Internet
at:www:makita.co.jp/global/index .html
Saw chain
•
Scabbard
•
Guide bar complete
•
Chain gauge
•
Round file 4.5 mm
•
Flat file
•
File holder with 4.5 mm file
•
File handle
•
1 I BIOTOP chainsaw oil
•
5 I BIOTOP chainsaw oil
•
Multi-purpose grease
•
Grease gun
•
are
16