Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
GENERAL INFORMATION
SCOPE OF DELIVERY
1 x VE1300.11SP Amplifier
1 x Wire Harness with 18-pin Connector for LOW LEVEL INPUT
1 x Wire Harness with 4-pin Connector for EXT. FAN +12V, MODE PRESET SWITCH, REM IN, REM OUT
1 x Wire Harness with 16-pin Connector for HIGH LEVEL INPUT
1 x Wire Harness with 18-pin Connector for SPEAKER OUTPUT
1 x Wire Harness with 10-pin Connector for SPEAKER OUTPUT, LIMITED POWER INPUT
1 x USB Cable, Length 5 m
1 x Bluetooth
Antenna
®
1 x Owner's Manual (German/English)
RECOMMENDED ACCESSORIES
INTENDED USE
This product is designed for the operation in a vehicle with an on-board voltage of +12 V with negative ground.
The device functions as an amplifier of audio signals as well as a digital audio processor used to modify audio
signals within a sound system in a vehicle.
RADIO EQUIPMENT TYPE
Function
Band information
Bluetooth
Version 5.0
DECLARATION OF CONFORMITY
Audio Design GmbH hereby declares that the ESX VE1300.11SP device complies with Directive 2014/53/EU.
The full declaration of conformity can be viewed at www.esxaudio.de/ce.
Distributor:
Audio Design GmbH
Am Breilingsweg 3, DE-76709 Kronau (Germany)
18
RC-DQ
Remote Controller with Display for Volume, Mode, Bass Level,
incl. Extension Cable (5 m)
Frequency range
2.400 MHz - 2.484 MHz
Maximum radiated power
30,0 dBm
Werbung
