Kopp Free-control Bedienungsanleitung Seite 70

All manuals and user guides at all-guides.com
GB
Integrated field strength detector – adapter
Each Free-control wireless adapter has an
internal field strength detector
This can be seen on the front of the wireless
adapter. With this, the radio link between the
wireless transmitter and the wireless adapter
can be evaluated during installation, mea-
ning the quality of the received transmission
signal at the wireless adapter.
As soon as a radio transmission signal is re-
ceived by the wireless adaptor, the LED blinks
between 1 and 4 times.
The LED of the field strength detector
blinks in programming mode as well as in
operating mode.
LED blinks 0x = no reception.
LED blinks 1x = bad reception.
• Recommendation: Be sure to change the
placement of the wireless transmitter
and/or wireless adapter to acquire a better
radio signal.
70
LED blinks 2x = fair reception.
1
• Recommendation: Check whether the
placement of the wireless transmitters
and/or wireless adapters can be changed
to acquire a better radio signal.
LED blinks 3x = good reception.
• Devices can be installed wherever desired.
LED blinks 4x = very good reception.
• Devices can be installed wherever desired.
1