Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
36
Replacing the lamp
•
Switch off the extractor hood and disconnect it from the power supply by
pulling the power plug or turning off the fuse.
•
Remove the grease filter.
•
Remove the lamp by prying it from the hood housing (this may require
pressure or force).
•
Unplug the lamp.
•
Replace the lamp with a new one of the same type and ensure that you
connect the lamp to the light cable correctly.
•
Turn the power back on by plugging in the power plug or turning on the fuse.
Max power
Voltage
Picture
Lamp cap
ILCOS D code
Self-ballasted LED modules
1,5 W
110 V – 240 V
Square/Diameter: 33.23 mm x 120 mm
/
DBS-1.5-
H-33.2/120
Werbung
