Parkside PABH 20-Li C3 Originalbetriebsanleitung Seite 6

CORDLESS HAMMER DRILL
PABH 20-Li C3
Introduction
Congratulations on the purchase of your
new appliance. You have selected a
high-quality product. The operating
instructions are part of this product. They contain
important information about safety, usage and
disposal. Before using the product, please famil-
iarise yourself with all operating and safety instruc-
tions. Use the product only as described and for
the specified range of applications. Please also
pass these operating instructions on to any future
owner.
Intended use
The PABH 20-Li C3 cordless hammer drill
(herein after appliance) is suitable for:
▯ Hammer-drilling into brickwork,
concrete and stone
▯ Drilling into stone, wood and metal
▯ Screwing into wood and metal
Any other usage of or modification to the appli-
ance is deemed to be improper and carries a
significant risk of accidents. The manufacturer
accepts no responsibility for damage(s) attribut-
able to misuse. The appliance is not intended for
commercial use.
Depicted components
SDS-plus tool holder
Dust protection cap
Locking collar
„Drill/hammer drill" switch
Rotation direction switch
On/Off switch
Battery charge level button
Battery display LED
Battery pack*
Release button for the battery pack
│ GB │ IE
■ 2
LED work light
High-speed charger*
Red charge control LED
Green charge control LED
Drill with round shank fitting
Drill with SDS-plus fitting
Screwdriver bits
Quick-release chuck
Universal bit holder
Grease
Package contents
1 cordless hammer drill
3 x 150 mm SDS-plus drills Ø 6/8/10 mm
3 x drill bits Ø 5/6/8 mm (HSS) with round shanks
8 x 50 mm bits (S2): 5.5/PH1/PH2 (2x)/PZ1/
PZ2/T20/T25
1 x bit extension (hexagonal shank)
1 x 10 mm round shank drill chuck
(SDS-plus fitting)
1 carrying case
50 g grease
1 set of operating instructions
Technical specifications
Cordless hammer drill PABH 20-Li C3
Nominal voltage
Idle speed
Stroke rate
Impact energy
Max. drill diameter
Rechargeable battery PAP 20 A1*
Type
Rated voltage
Capacity
Cells
20 V (DC)
n 0–900 rpm
0
0–5000 rpm
approx. 1 joule
8 mm for metal
10 mm for concrete
16 mm for wood
LITHIUM ION
20 V (DC)
2 Ah
5
PABH 20-Li C3