YATO YT-82355 Originalanleitung Seite 13

PRODUCT CHARACTERISTICS
The wall sander with a handle is a power tool using sanding discs to sand large, fl at surfaces. Thanks to the long handle, it is pos-
sible to sand walls without using any platforms. The sander features a system for the extraction of dust generated during works,
and a hose to connect the unit to a vacuum device, which reduces the amount of dust in the work area. As the proper use of the
power tool is a condition for the correct, reliable and safe operation of it, please
Read this entire instructions manual before the fi rst use of the tool and keep it for future reference.
The supplier shall not be liable for any damage resulting from failure to comply with the safety instructions and recommendations
specifi ed in this instructions manual.
ACCESSORIES
The unit is supplied as a complete package, but it requires some assembly work. The sander package includes
- sanding sheet
- hose with a dust bag,
- handle extension arm.
TECHNICAL PARAMETERS
Parameter
Catalogue No.
Power supply voltage
Power frequency
Rated power
Rated speed
Spindle size
Disc fi xing ring diameter
Sanding disc diameter
Weight
Noise level
- sound pressure L ± K
pA pA
- power L ± K
wA wA
Vibration level ± K
ah,AG
Insulation class
Protection rating
The declared total vibration emission value and declared noise emission value have been measured using the standard test
method and can be used to compare one tool to another. The declared total vibration emission value and declared noise emission
can be used in the initial exposure assessment.
Caution! The vibration emission during tool operation may diff er from the declared value, depending on the manner the tool is used.
Caution! Safety measures to protect the operator, which are based on an assessment of emission exposure under actual condi-
tions of use (including all parts of the work cycle, such as the time when the tool is switched off or idle and the activation time),
must be specifi ed.
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
O R I G I N A L
EN
Unit
[V]
[Hz]
[W]
[min ]
-1
[mm]
[mm]
[kg]
[dB (A)]
[dB (A)]
[m/s ]
2
I N S T R U C T I O N S
Value
YT-82355
230 - 240
50/60
820
600 - 1900
M6
215
225 / 215 / 210
3.7
86.0 ± 3.0
94.0 ± 3.0
7.91 ± 1.5
II
IP20
13