Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.8 Removing the Inner Glass of The
Oven Door
Inner glass of the product's front door may
be removed for cleaning.
1. Open the oven door.
2. Pull the plastic component, attached on
the upper section of the front door, to-
wards yourself by simultaneously
pushing on the pressure points on both
sides of the component and remove it.
1
Innermost
glass
Third inner
3
glass
Plastic
5
glass slot-
Lower
3. As shown in the figure, gently lift the in-
nermost glass towards "A" and then,
remove it by pulling towards "B".
4. Repeat the same process for removing
The first step of regrouping the door is to
replace the second and third glasses (2, 3).
As shown in the figure, place the bevelled
edge of the glass to meet the bevelled
edge of the plastic slot.
The attachment order of the second and
third inner glasses is not important, as
they are interchangeable.
While attaching the innermost glass (1),
pay attention to place the printed side of
the glass on the second inner glass. It is
crucial to place the lower corners of all in-
ner glasses to meet the lower plastic slots
(5). Push the plastic component towards
2
Second in-
ner glass
the frame until a "click" sound is heard.
Outer glass
4
7.9 Cleaning the Oven Lamp
In the event that the glass door of the oven
lamp in the cooking area becomes dirty;
clean using dishwashing detergent, warm
EN / 40
the second and third glasses.
After cleaning, all glasses must be
reassembled.
Werbung
