Bergstrom DUAL POWER II Montageanweisungen Seite 7

DUAL POWER II
COMPRESSOR - CONDENSER
1- Position the condenser-compressor unit in
the most suitable place, depending on the
vehicle.
2- If necessary, manufacture resistant supports
for positioning.
3- Mount the unit with 8/125x25 screws.
! Caution: To ensure proper operation of
the unit, at least the side grilles together
with the rear and electro grilles should be
free, or the side grilles together with the
bottom and electro grilles should not be
covered.
Side grilles
Rear grilles
Bottom grilles
1
7
Electro grilles
2
Bottom grilles
3
EN
1
Side grilles
1
Electro grilles