Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
6) Installing the Door:
Secure the upper and lower hinge screws in the left upper and left lower corners of the cabinet.
Do not tighten the screws; leave a gap for hinge installation.
Align the upper and lower hinges of the door with the screws and install them in place.
Tighten all 4 screws.
7) Installing the Cabinet Cover Panels
Swap the removed panels between positions
"①" and "②", and then install them in their
respective positions.
0.5 h
11. Electrical connection
Before each connection check if:
power supply, socket and fusing are appropriate to the rating plate.
the power socket is earthed and no multi-plug or extension.
Connect the plug to a properly installed household socket.
WARNING!
To avoid risks a damaged power cord must be replaced by the customer service (see
warranty card).
9. Door Reversibility
Before connecting the appliance to the power supply you should check, whether the door
swing must changed from right (as delivered) to left, if this is required by the installation
location and the usability
WARNING!
The appliance is heavy. You need two persons to carry out the door reversibility.
Do not tilt the appliance more than 45 ° to prevent damage of the cooling system.
20
6
10. Waiting time
The maintenance-free lubrication oil is located
capsule of the compressor. This oil can get
the closed pipe system during transport if the
ance is tilted. Before connecting the applianc
power supply, wait 0.5 hours (Fig. 6) so that the
back into the capsule.
EN
2
1
1
2
in the
through
appli-
e to the
oil runs
Werbung
