Haier HUC44GDEH1 Benutzerhandbuch Seite 19

EN
7. Installing the Kickboard
1) Adjust the kickboard bracket front-to-back distance:
Loosen the 2 screws on the left bracket and the 3 screws on the right bracket.
Adjust the brackets front to back to ensure that the front edge of the brackets is at a
horizontal distance from the outer surface of the door body equal to the depth of the
kickboard (d) (50~100mm) + 2mm.
Tighten the screws to secure the brackets firmly.
door
d+2
left bracket
2) Install the kickboard
Insert the assembled kickboard into the square holes on the inner brackets of the
cabinet.
Move the kickboard downward, leaving at least a 2mm gap from the ground for ease of
mobility.
Secure the kickboard by tightening the screws on both sides.
case
kickboard
8. Securing to the Cabinet
1) Push the product into the recessed space of the cabinet and plug it into the power
source.
Note: Ensure that the power socket is placed inside the adjacent space of the recessed area.
2) Secure the brackets to the cabinet:
Take 4 screws-B, depending on the chosen brackets, follow the illustration below to
securely connect and fix the product to the cabinet.
right bracket
door
2mm
power
Installation
case
17