Storage; Troubleshooting - Cleanmaxx SG 5008S-5 Gebrauchsanleitung

11. If necessary, repeat the cleaning process several times until no more limescale residues
emerge from the nozzles.
12. After the device has cooled down completely, pull the steam quantity control unit out and
turn the device upside down in order to remove any remaining amounts of limescale or
water.
Separate descaling of the device is not necessary.

Storage

• Before you store away the device, allow it to cool down completely and clean it in the
manner described in the "Cleaning and Care" chapter.
• Store the device in a dry, clean, frost-free location which is out of the reach of children and
animals. When you do this, place the device upright on its base on a fl at, stable surface.

Troubleshooting

If the device is not working properly, please check fi rst of all whether you can rectify a problem
yourself. Otherwise you should contact the customer service department.
Do not attempt to repair a defective device yourself!
Problem
The device does not
work. The operating
lamp does not light
up / fl ash.
No steam is produced.
Possible Cause / Solution
• Is the mains plug correctly inserted into the socket?
• Is the plug socket defective? Try a different socket and check
the fuse of your mains connection.
• Is the water reservoir empty? Refi ll it (see the "Use" chapter,
"Filling the Water Reservoir" section).
• The device has not yet reached operating temperature. Wait
until the temperature control lamp lights up constantly.
• Is the temperature control on a low temperature setting?
Select a higher temperature setting.
• Is the device upright? Press the
check whether any steam emerges.
• If you have set a high temperature, the steam which is
generated is dry and almost invisible. This is exacerbated by a
high ambient temperature. Switch the temperature control to
a lower temperature to check whether the device is producing
steam.
• Have you not moved the device for some time? The automatic
safety switch-off function was activated. Take hold of the handle
so that the device switches back on and heats up again.
25
steam burst button to