Herunterladen Diese Seite drucken

Conel CLEAR PRO Montage- Und Betriebsanleitung Seite 45

Vorschau ausblenden Andere Handbücher für CLEAR PRO CONEL:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

If the CLEAR PRO CONEL retrofit leakage protection MultiControl 3/4" - 1 1/4"
detects an unusually high flow rate in a very short time, the unit assumes that
there is a leakage. The flow leakage can be set up to a level of 5,000 l/h, but can
also be switched off completely.
Example:
The factory-set maximum possible flow of 3,000 l/h lasts for at least one minute
- usually in the event of a pipe burst - then the CLEAR PRO CONEL retrofit
leakage protection MultiControl 3/4" - 1 1/4" immediately shuts off the pipe
system.
CONEL tip:
Install an additional CLEAR PRO CONEL floor sensor at critical points. This
detects local water leakage regardless of the selected settings. The CLEAR PRO
CONEL floor sensor can be linked to the CLEAR PRO CONEL retrofit leakage
protection MultiControl 3/4" - 1 1/4" so that it can shut off immediately.
Here the user can define the time period in which a selected profile is active.
After the desired time has elapsed, the CLEAR PRO CONEL retrofit leakage
protection MultiControl 3/4" - 1 1/4" returns to the profile Present. The setting
options range from 1 hour to 28 days. The time is always given in hours.
Example:
You are going away for four days and therefore select a profile with a low water
consumption amount. If you set the return time to Present to 4 days, the unit
will automatically return to this profile after the selected time has expired
without you having to worry about it.
At regular intervals, the unit performs a test that detects even the smallest leaks.
The micro leakage test can be switched On or Off.
The warning sound can be switched On or Off
In the self-learning phase, the CLEAR PRO CONEL retrofit leakage protection
MultiControl 3/4" - 1 1/4" analyses the water consumption and usage habits of
the household. The values determined can then be transferred to a self-selected
profile. The setting options for the duration of the self-learning phase range from
1 day to 28 days.
Flow leakage
Return time to Present
Microleakage test
Warning sound
Self-learning phase
45
ex factory
3000 l/h
ex factory
Factory setting
without time
ex factory
Warning
ex factory
On
ex factory
Off

Werbung

loading