Conel CLEAR PRO Montage- Und Betriebsanleitung Seite 41

9.5 PROFILES AND SELF-STUDY PHASE
During the self-learning phase, the factory-set profi le „Present" is acti ve to ensure eff ecti ve leakage
protecti on at all ti mes.
If the CLEAR PRO CONEL retrofi t leakage
protecti on Multi Control 3/4" - 1 1/4" locks
out, the self-learning phase is interrupted.
In this case, it must be restarted according
to the following descripti on.
/
In additi on to the factory-set profi le „Present",
you can also create your own profi les under
„Setti ngs" with the butt on „Add profi le"
(Fig. 9.13)
/
press the „Self-learning phase" butt on under
„Setti ngs" (Fig. 9.13)
/ the CLEAR PRO CONEL retrofi t leakage
protecti on Multi Control 3/4" - 1 1/4"
analyses water consumpti on over a set period
of ti me
/
the determined values can be transferred to an
already created profi le or to a new profi le.
Fig. 9.14:
INFORMATION CONTROL via
/
„Status" butt on: currently set values and
operati ng status
/
„Stati sti cs" butt on: daily, monthly and
cumulati ve water consumpti on of the
household
/
and the informati on about the next fi lter
fl ushing due appears in the header data.
41
Fig. 9.13
Fig. 9.14