Conel CLEAR PRO Montage- Und Betriebsanleitung Seite 40

40
/
a confi rmati on appears
(Fig. 9.9)
Stay close to the unit when connecti ng.
If no connecti on is established, check the
AccessPoint mode.
The AP turns off aft er 3 minutes
and must be reacti vated if required!
9.4 DIAL UP TO CONEL CONNECT
The CLEAR PRO CONEL Multi Control leakage protecti on system has been registered and connected
to the WLAN network. To operate via the CLEAR PRO APP, start it and press the WIFI-BUTTON at
the bott om left of the start screen (Fig. 9.2).
/
Enter user name and password
/
to remain permanently logged in, move
the slider to the right
/
press the „Sign in"- butt on (Fig. 9.10)
/
the created project is displayed in the
overview (Fig. 9.11)
/ select the CLEAR PRO CONEL
Multi Control leakage protecti on system
at this point
/
press the „Setti ngs" butt on (Fig. 9.12) and
confi gure the CLEAR PRO CONEL
retrofi t leakage protecti on Multi Control
3/4" - 1 1/4"
Fig. 9.10
Fig. 9.9
Fig. 9.11
Fig. 9.12