Conel CLEAR PRO Montage- Und Betriebsanleitung Seite 33

Fig. 6.6:
/
Connect the connector housing [d]
of the cable harness [e] (factory-
mounted on the leakage protection
module) to the MultiControl [a] as
shown
/
insert the MultiControl nozzle [g] into
the receptacle [f]
Fig. 6.7:
/
push the MultiControl [a]
vertically downwards in the
direction of the arrow and insert it
into the holder as far as it will go
/
When assembling, make sure
that the wiring harness [e] is
carefully inserted in the gap
between fairing [h] and
MultiControl [a] is placed
Fig. 6.8:
/
Clip in clamp [a] to fix in place
/
insert the replacement cover [b],
included in the scope of delivery,
to close the housing of the
CLEAR PRO CONEL retrofit
leakage protection MultiControl
3/4" - 1 1/4".
[g]
[e]
[f]
[a]
[e]
[h]
[a]
[b]
33
[a]
[d]
Fig. 6.6
Fig. 6.7
Fig. 6.8