Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Inserting and fixing the hob
• Place the hob on a clean, stable and smooth surface
(e.g. use the packaging as a base).
Make sure that no pressure is exerted on the elements
that protrude from the hob.
• Fit the 4 installation brackets (1) using the supplied screws (2)
and screwing them into the corresponding screw holes (3)
on the hob base (4) as shown in the illustrations.
(These ensure that the hob is fixed in the worktop cut-out
after insertion).
5
4
3
2
• Adjust the position of the brackets according to the installation
situation or the thickness of the worktop (see illustration).
• Check the hob gasket for damage
and for correct positioning on the hob.
• Insert the hob into the prepared cut-out in the worktop
with the cables first and aligned centrally.
Make sure that it sits stably.
Notes:
• There are ventilation openings on the outside of the hob.
When inserting the hob, make sure that they are not blocked
by the worktop!
• When inserting the hob, make sure that its connection cable
cannot be crushed, bent or twisted!
6
5
1
4
Mounting and Installation
2
1 Installation bracket
3
2 Screw
1
4
3 Screw hole
5
4 Hob base
6
5 Glass ceramic plate
6 Worktop
3
2
1
59
Werbung
