Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Problem
The sensor keys are
difficult to operate.
The display works,
but the cookware is
not heated.
The heating process
takes an unusually
long time.
The cooking zones
switch off and on
during operation
A cooking zone
switches off unex-
pectedly
Possible cause
There is moisture
or soiling on the
control panel
The keys are not
operated correctly.
The overheating
protection has
been triggered.
Unsuitable cook-
ware is used
Fluctuations in the
power grid
The heating pro-
cess is carried out
in intervals
The auto switch-off
of the cooking zone
has been activated
What to do
Make sure that the control panel is
completely clean and dry.
Note that a thin film of moisture may
not be visible.
Touch only one key at a time with
the ball of your finger for at least 1
second (see corresponding section).
See "The hob switches off
unexpectedly".
Use cookware with a high proportion
of magnetic particles (see "Suitable
cookware and its use").
Fluctuations of as little as 10 volts
in the mains supply can lead
to a much longer cooking time.
This is by design
and is not a malfunction.
Switch the cooking zone on again
if necessary.
For time cooking zone operation
(see auto shut-off table under "Fea-
ture...").
Troubleshooting
49
Werbung
