Herunterladen Diese Seite drucken

KKT KOLBE EB8317HC Benutzerhandbuch Seite 136

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Mounting and Installation
9.2 Electrical connection of the oven
  WARNING!
Risk of electric shock!
There is a risk of fatal electric shock
if the appliance is connected by unqualified
persons!
This appliance may only be installed/connected
and earthed by a certified electrician
in accordance with the applicable regulations
and standards!
Important notes on connection to the mains
• The length of the connection cable must be sized
so that the device can be connected prior to insertion.
• The protective conductor must be dimensioned
in such a way that it is only subjected to tensile stress
after the live wires of the connecting cable,
if the strain relief fails.
• The installer must ensure that an easily accessible
circuit breaker (fuse) with a contact gap of at least
3 mm is integrated into the appliance's circuit,
which complies with the applicable regulations and
ensures complete disconnection of the appliance
from the power supply in the event of an emergency.
• The appliance is designed for permanent installation
with a three-pole mains cable and is to be connected
by the installer according to the connection diagram
shown.
• The cable must be laid in such a way that it cannot
be kinked, crushed or twisted and cannot come into
contact with sharp edges or hot surfaces.
• The mains cable may only be replaced by a qualified
electrician in compliance with the applicable
regulations.
• Do not use multiple plugs, socket strips or extensions
as there is a risk of fire if they are overloaded.
66
L
live /
conductive
N
neutral
PE
Grounding yellow -
brown
blue
green

Werbung

loading