Mounting and Installation
Requirements for the installation site
• For installation, all dimensional specifications and spacing
requirements of this manual, as well as other applicable
regulations, must be observed and complied with!
• Make sure that the kitchen furniture intended
for installation of the appliance guarantees sufficient
ventilation and heat radiation!
The built-in niche must not have a rear wall,
there must be no door or similar at the front
and the distance between the rear wall of the appliance
and the wall must be at least 45mm!
• If possible, install the appliance in a kitchen unit
of standard width 600mm so that it will be flush
with the furniture front.
• The materials of adjacent and surrounding surfaces,
as well as included adhesives, must be fireproof /
heat resistant up to 120°C to exclude deformation
of surfaces or detachment of coatings!
• The appliance must not be installed directly next to
refrigerators or freezers, as the escaping heat can lead
to unnecessarily high energy consumption and impair
their function!
• At least 2 persons are required for installation!
• Make sure that the installation surface for the stove can
support its weight, is level and horizontal and ensures
a high degree of stability!
• If you install a hob above the oven, make sure that the
oven and hob power cables are routed separately
so that the oven can be removed independently of the hob
if necessary!
64