Yamaha SPX50D Bedienungsanleitung Seite 27

[1] Bank Selection and MIDI Channel Programming [2] Assigning Effects to MIDI Program Change Numbers
@ Press the UTILITY button until the MIDI CONTROL func- Ф Press the UTILITY button until the MIDI PROG CHANGE
tion appears (MIDI CONTROL is the second function on _ _ function appears (MIDI PROG CHANGE is the third func-
the UTILITY "list"). | tion on the UTILITY "list").
. Q Select the bank to program using the A and 57 buttons. @ Use the ^ and V buttons to select the program change
P number to which a new.SPX50D memory location number
G Press the STORE button to move the cursor to the channel | is to be assigned. The range of available program change
(ch) parameter. numbers is from 1 to 128.
Ф Use ће ^ and V buttons to set the receive MIDI channel Q Press the STORE button to move the cursor to the MEM
(1 — 16), the OMNI mode (all channels can be received), (memory number) parameter.
or turn MIDI reception OFF for the selected bank.
Ф Use the / and V buttons to select the memory location
© Press the MEMORY button to return to the BANK parame- number containing the effect which is to be assigned to the
ter if you wish to select a different bank for programming. currently selected program change number.
& Press the MEMORY button to return the cursor to the PGM
(program number) parameter in order to select a new pro-
= gram change number for effect assignment.
UTILITY
15 E
MIDI CONTROL
BANK:A сћ= 1
| О MIDI PROG CHANGE
PGM i= MEM 1
MIDI CONTROL
BANK:B ch= 1
EF
MIDI PROG CHANGE
PGM 3= MEM 3
Selected bank STORE
Y PGM number STORE |
MIDI PROG CHANGE
PGM 3= MEM 3
аы
MIDI CONTROL
BANK:B ch= 1
em
RE:
®
MIDI CONTROL
©
MIDI PROG
CHANGE
MIDI channel number | MEM number