TESTBOY TV 215N Bedienungsanleitung Seite 52

Measuring resistance / continuity / diode
Before carrying out each resistance measurement, make sure
that the circuit to be measured is not energized and that all
condensers are deenergized.
Set the function switch to range "Ω/
Press the "SEL" button to switch between measuring the
resistance, continuity and diode.
Insert the black and red test leads into the inputs COM and
INPUT.
Apply the test leads to the circuit to be measured and read the
value.
Note: The continuity test is suitable to determine if there are
short circuits / open circuits.
Auto Power OFF
In order to save the battery, the appliance automatically
switches off after approx. 30 minutes.
If the appliance is in the "sleep mode", it can be returned to
normal measuring mode by pressing the "SEL" button.
®
Testboy TV 215N
"
51