TESTBOY TV 215N Bedienungsanleitung Seite 37

Operation
Operation
Thank you for purchasing the Testboy
The Testboy
Category CAT III and for voltages that do not exceed the
reference to earth 600 V (AC or DC).
Operation
Before taking a measurement, allow the appliance to
acclimatize.
| When using this tong meter, the user must adhere to all usual
safety regulations.
| When using in the vicinity of appliances that cause interference
or noise, the display can indicate gross errors.
| Only use the appliance as described in these operating
instructions, otherwise the protective equipment of the
appliance could be impaired.
| To prevent damage to the appliance, do not exceed the
maximum input values given in the Technical Data.
| Pay attention to the function switch and make sure that it is set
at the correct position before each measurement.
|
Particular attention must be paid for tasks on naked cables or
busbars.
| Every inadvertent contact with the conductor can result in an
electric shock.
| Caution when working with voltages of more than 60 V DC or
30 V AC RMS. At such voltages, there is the danger of electric
shocks.
| Before switching to other functions, the tongs must be removed
from the circuit to be tested.
|
During measurements, place the fingers behind the safety ring.
36
®
TV 215N is intended for measuring systems of
®
TV 215N
Testboy
®
TV 215N