TESTBOY TV 215N Bedienungsanleitung Seite 46

Information for the measurement
To obtain the most accurate measurement possible, place the
cable between the tong jaws as far as possible in the
intersection of the marks.
If the position of the cable is not accurate within the tongs, the
measurement error is a maximum of 1.5 %.
Accuracy:
± (% of the read-out value + number of digits) at 18° to 28 °C
(64° to 74°F) and rel. humidity < 75 %.
AC (automatic range selection)
Measuring
range
2 A
20 A
200A
600A
Frequency response: 40-400 Hz
Maximum input current: 600 A AC
The value is displayed and retained, this measurement is only
carried out once.
After the measurement, keep the "SEL" button pressed, to
change to the normal measurement mode, by again pressing,
returns to the inrush measurement.
®
Testboy TV 215N
Information for the measurement
Resolution
0.01 A
0.1 A
0,1A
1A
Tolerance
± 3.5 % + 10 digit
± 1.5 % + 10 digit
± 2,5 % + 10 digit
± 3.0 % + 10 digit
45