TESTBOY TV 215N Bedienungsanleitung Seite 50

OPERATING INSTRUCTIONS
If the value set is exceeded for a longer period of time by the
current being measured, heating can occur that can impair the
operating and function safety of internal circuits.
To prevent discharges and/or incorrect measurement values, do
not carry out measurements on high-voltage cables (> 600 V).
Measuring AC
Make sure that the test leads are removed from the
measurement sockets.
Set the function switch to range A~.
Clasp one of the conductors to be measured with the current
transformer (tong jaw). Make sure that the tongs are fully
closed.
Read the measurement value.
Using the "True RMS" function, zero compensation fluctuations
of up to 30 Digits occur, however, they do not influence the
measurement value.
®
Testboy TV 215N
To measure
OPERATING INSTRUCTIONS
49