Parkside PMTS 180 B2 Originalbetriebsanleitung Seite 16

Warranty period and statutory claims
for defects
The warranty period is not prolonged by repairs
effected under the warranty. This also applies to
replaced and repaired components. Any damage
and defects present at the time of purchase must be
reported immediately after unpacking. Repairs
carried out after expiry of the warranty period shall
be subject to a fee.
Scope of the warranty
This appliance has been manufactured in accord-
ance with strict quality guidelines and inspected
meticulously prior to delivery.
The warranty covers material faults or production
faults. The warranty does not cover product parts
that are subject to normal wear and tear and can
therefore be considered wearing parts, such as saw
blades, replacement blades, abrasive papers, etc.
or for damage to fragile parts, such as switches or
parts made of glass.
The warranty does not apply if the product has
been damaged, improperly used or improperly
maintained. The directions in the operating instruc-
tions for the product regarding proper use of the
product are to be strictly followed. Uses and actions
that are discouraged in the operating instructions
or which are warned against must be avoided.
This product is intended solely for private use and
not for commercial purposes. The warranty shall be
deemed void in cases of misuse or improper
handling, use of force and modifications / repairs
which have not been carried out by one of our
authorised Service centres.
The warranty does not apply to
■ Normal reduction of the battery capacity
over time
■ Commercial use of the product
■ Damage to or alteration of the product by the
customer
■ Non-compliance with safety and maintenance
instructions, operating errors
■ Damage caused by natural hazards
PMTS 180 B2
Warranty claim procedure
To ensure quick processing of your case, please
observe the following instructions:
■ Please have the till receipt and the item number
(IAN) 438492_2304 available as proof of
purchase.
■ You will find the item number on the type plate
on the product, an engraving on the product,
on the front page of the operating instructions
(below left) or on the sticker on the rear or
bottom of the product.
■ If functional or other defects occur, please
contact the service department listed either by
telephone or by e-mail.
■ You can return a defective product to us free of
charge to the service address that will be
provided to you. Ensure that you enclose the
proof of purchase (till receipt) and information
about what the defect is and when it occurred.
You can download these instructions
along with many other manuals,
product videos and installation
software at www.lidl-service.com.
This QR code will take you directly to the Lidl
service page (www.lidl-service.com) where you
can open your operating instructions by entering
the item number (IAN) 438492_2304.
NOTE
► For Parkside tools, please send us only the
defective item without the accessories (e.g.
battery, storage case, assembly tools, etc.).
WARNING!
► Have the power tool repaired by the
service centre or a qualified electrician and
only using genuine replacement parts. This
ensures that the safety of the tool is main-
tained.
► Always ensure that the power plug or the
mains cable is replaced only by the manu-
facturer of the appliance or its customer
service. This ensures that the safety of the
tool is maintained.
GB │ IE │
13 ■