CTX G-26 Installationshandbuch Seite 33

| | Set temperature will only be displayed for 5 seconds
Step Press Key Display Reads
1 Б, —
1. Select preset menu
|
thru
[P -- #]
l — key to be programmed
|
| |
2. View top temperature setpoint
TOP |
[93°C t
TEMP jos
Flashing digit will increase one number at a time 0 to 9 and then roll over to
0. Set the digits to your desired top temperature.
(158% С] (example only)
D
Pressing the cursor key will move the cursor left to right to the digit to be
changed. The digit will start flashing and can then be changed using the "A"
key.
NOTE The displayed setting is then entered when you press "BOTTOM
TEMP" in Step 4. If you are programming only one zone then press any key
except "A" or "=>" and the displayed setting will be entered.
Minutes (00 to 30)
02:08 |
Set all digit values. Press any key except "A" or "+" and
new displayed digits will be entered into memory. When all
preset keys have been programmed with new temperature
and cook time oven will then operate with MenuSelect
reset values. : 27
7. Enter new cook time setpoint
IE
к