Hitachi HRNME Serie Installations- Und Betriebshandbuch Seite 33

DSW1: For Test Run
¡
Setting before shipment
¡ DSW2: Optional Function Setting
Setting before shipment
DSW3: Capacity
¡
Setting position
PMML0197_r0_04-10.indb 33
INSTALLATION AND OPERATION MANUAL
3HVRNME 4HVRNM1E
5HVRNM1E 6HVRNM1E
4HRNM1E 5HRNM1E
6HRNM1E 4HVRNS1E
5HVRNS1E 6HVRNS1E
Refrigerant Cycle No. Setting
¡
DSW4
Setting position
(Setting for the ten digit).
RSW1
Setting position.
(Setting for the last digit).
DSW5: Transmission Setting of End Terminal Resistance
¡
Setting before shipment
DSW6: Function setting
¡
(No setting is required)
(RAS-3~4H(V)RNM(1)E)
Power source setting
(RAS-5~6H(V)RNM1E and RAS-4~6HVRNS1E)
Power source setting
JP1~6: Jumper cable
¡
No setting is required
13.3. COMMON WIRING

CAUTION:
All the field wiring and electrical components must comply with local
codes.
33
400 V 230 V
IVX ES
(Setting is required)
IVX ES
JP1 cut: Fixing Cooling Mode
JP5 cut: Alternative Defrosting
JP6 cut: High-Pressure Control
Based on R407C Piping
08/07/2010 9:20:55