Instruction CF-RS Standard Room Thermostat
3. Transmission Test
Initiate transmission test on Room
Thermostat - g. 1
• Press the push button
• LED
goes ON
Link test is satisfactory
• LED
goes OFF
Link test is unsatisfactory
• LED
ashes 5 times
No Link connection to Room
Thermostat
• Try to relocate Room Thermostat in the room
• Or install Repeater Unit (CF-RU) and locate be-
tween Master Controller and Room Thermostat
Note: Master Controller output LED(s)
ed to the room thermostat, ash(es) during Link test
8
VI.UH.L1.52
Produced by Danfoss Floor Heating Hydronics 08.2008
connect-