Adding Device; Perform Network Test - Danfoss Link FT Installationsanleitung

Installation Guide Danfoss Link™ FT

Adding device

Adding the Danfoss Link™ FT to a system is
GB
made from the Danfoss Link™ CC Central
Controller .
When adding, press the install
button until the LED gives
a fast green flash .
For further information,
Max. 1 m
see the Danfoss Link™ CC
instruction manual:
Configuration 6:
Adding devices.

Perform network test

When the Danfoss Link™ FT has
been added to the Danfoss Link™
CC Central Controller, a network
test should be performed .
For more information on
network tests, see the Danfoss
Link™ CC instruction manual:
Configuration 8: Perform network
test .
9
VISGZ45X © Danfoss 04/2011