Rimage Prism III Bedienungsanleitung Seite 13

Set your Printing Preferences
1. Access Print Preferences. Refer to page 9.
2. Select the Masking Settings tab.
3. Select the Print on Hub option.
4. Measure the inner and outer diameters of the printable surface.
5. Enter the diameters in the Hub Settings section.
6. Select OK to save your changes.
Service Options
The Service tab provides information on your Prism III printer and offers a
series of tools to keep your printer current and functioning properly.
1. Access Print Preferences. Refer to page 9.
2. Select the Service tab.
The window that displays features information about your Prism III
printer.
• Driver: Displays information about the printer driver including the
name and version number.
• Printer: Displays information about the printer including the printer
name, serial number, and firmware version.
• Printer Status: Displays the status of the printer.
• Ribbon Status: Displays the ribbon type, the percentage of ribbon
used, the ribbon part number and color code, and the serial number
of the ribbon that is installed.
Print PRN Files
1. Access Print Preferences. Refer to page 9.
2. Select the Service tab.
3. Select Service Toolbox.
The Service Toolbox
dialog box opens.
4. Select Print PRN File.
A dialog box launches
that allowes users to
print selected PRN files.
2001809_A
Center the Image on a Disc
The centering image tool is used to adjust the mechanical center of the
printer to match the standard CD Designer template.
Tip: Readjustment is typically not needed unless printer components are
replaced.
1. Access Print Preferences. Refer to page 9.
2. Select the Service tab.
3. Select Service Toolbox.
4. Select Center Image.
For more information visit rimage.com/support
The Service Toolbox dialog box opens.
The Centering Image dialog box displays.
10