Product Information; Unit Overview, Fig. A, B And C; Product Description - Maico ECA 100 ipro Montageanleitung Und Betriebsanleitung

GB

3. Product information

3.1 Unit overview, Fig. A, B and C

1 Housing with motor
2 Impeller
3 Cable grommet
4 Electronics cover
5 Internal grille or internal shutter
5.1 Fixed internal grille
5.2 Electrically operated internal shutter
5.3 Bimetal
6 Cover
7 Designer cover
8 Electronic circuit boards
8.1 Standard electronics
8.2 Sensor electronics
(only for models F, H and B)
8.3 VZC electronics
9 Sensors
9.1 Motion sensor "B"
9.2 Light sensor "F"
9.3 Humidity sensor "H"
10 Start delay/overrun time for LEDs
11 Start delay setting button
12 Overrun time setting button
Unit model
ECA 100 ipro
ECA 100 ipro VZC
ECA 100 ipro F
ECA 100 ipro H
ECA 100 ipro B
ECA 100 ipro K
ECA 100 ipro KVZ
ECA 100 ipro KF
ECA 100 ipro KH
ECA 100 ipro KB
Bold Condition as supplied
● Standard equipment
12
Start delay Overrun time
[sec.] [min.]
0/50/90/120 0/8/17/25
0/50/90/120 0/8/17/25
0/50/90/120* 8/17/25**
0/8/17/25
0/50/90/120 0/8/17/25
0/50/90/120 0/8/17/25
0/50/90/120* 8/17/25**
0/8/17/25
*
** "0 min" overrun time available when using an

3.2 Product description

● Small room fan for extracting air from
rooms.
● ECA 100 ipro with fixed internal grille.
● ECA 100 ipro K with electrically operated
internal shutter.
● Two performance levels as standard.
● Models
● Standard model: Can be operated at
two levels with double switch.
● VZC and KVZC: Model with start delay
and overrun time.
● F and KF: Model with light sensor, start
delay and overrun time.
● H and KH: Model with humidity control
(fully automatic), start delay and overrun
time. No settings required.
● B and KB: Model with motion detector
and overrun time.
Mains cable
[mm²]
5 x 1.5
5 x 1.5
3 x 1.5
3 x 1.5
3 x 1.5
5 x 1.5
5 x 1.5
3 x 1.5
3 x 1.5
3 x 1.5
Available when using an optional switch.
optional switch (e.g. light switch).
4 operating Speed
programmes controllable
●
●
●
●
●
●
●
●