Renishaw TRS2 Schnellstartanleitung Seite 6

The laser used in the Renishaw TRS2
non-contact broken tool detection system
emits visible red light at a wavelength of 650 nm
and has a power output of less than 1 mW.
The laser used is classified as a Class 2 product
as defined by BS EN 60825-1:2007.
The laser complies with 21CFR 1040.10 except
for deviations pursuant to Laser Notice No. 50
dated June 24, 2007.
Position
of
labels
1-2
Caution – Laser safety
The standard BS EN 60825-1:2007 directs to
attach a laser warning label and explanatory
label.
A warning label and explanatory label are
permanently fixed to one side of the housing,
as shown below. An adhesive warning label is
provided for attachment outside the machine.
Warning label
Aperture
label
Laser
aperture
COMPLIES WITH 21 CFR 1040.10 AND BS EN 60825-1:2007
Explanatory label
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
1mW MAXIMUM OUTPUT
EMITTED WAVELENGTH 650nm
PULSE DURATION 2µs