Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connecting the field bus coupler
Safety
General
The EtherCAT interface is connected to the BK1120 field bus coupler.
Connections on
the BK1120 field
bus coupler
Connections on
the BK1120 field
bus coupler - ex-
ternal variant
38
WARNING! An electric shock can be fatal. Before starting work, ensure that all
devices and components are
-
switched off
-
disconnected from the mains
-
prevented from being switched back on again.
CAUTION! Risk of damage. Before starting work ensure that the cable for the ex-
ternal power supply to the interface is de-energised and remains de-energised
until all work is complete.
(1)
(2)
NOTE! The external power supply must not come via the power source. Use the
robot or control for the external power supply.
CAUTION! Risk of damage. Before starting work ensure that the cable for the ex-
ternal power supply to the interface is de-energised and remains de-energised
until all work is complete.
(1)
EtherNet RJ 45 connection - X1
IN
(2)
EtherNet RJ 45 connection - X2
OUT
(3)
(3)
DC IN connections
for connecting the external power
supply
Werbung
