Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Interface description
Motion sensing follow.
Motion sensing evade.
Quiet(outdoor).
Note: Each function is usually only applicable to some models.
Communication with central controller
(1) After the controller receives the central command from the central controller. It displays the icon
.
At this time,all the keys except the ON/OFF, fan speed, setting temperature are invalid.
(2) After the controller receives the lock command, it displays the icon
invalid.
(3) In central or lock state, backlight is valid, press any keys to wake up screen.
Forced Cooling/Heating
(1) After controller is in cooling mode and is turned off, long press ON/OFF key for 10S to enter
forced cooling function. At this time, controller will be turned on, and "LL" flashes in the middle area
to indicate that the forced cooling function is turned on.
(2) After controller is in heating mode and is turned off, long press ON/OFF key for 10S to enter
forced heating function.At this time, controller will be turned on, and "HH"flashes in the middle area
to indicate that the forced heating function is turned on.
(3) All keys are invalid except ON/OFF key under forced cooling/heating mode.
(4) When the forced cooling/heating is set, press ON/OFF key to exit this function.
Wi-Fi ( Only valid for part of models,please do follow the corresponding indoor unit installation
manual's instruction.)
Keep pressing On/Off key for 10S to enter Wi-Fi configuration function, Wi-Fi icon will flash. Then,
the user can operate the mobile phone to configure.After the binding is successful, the wifi icon will
still display.
Filter Cleaning
When filter cleaning icon
keys for 5S to cancel the display of icon.
is displayed, the icon will display in main interface. Press up and down
15
. At this time, all keys are
Werbung
